ΕΤΑΙΡΕΙΑ
ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ
Rated power with 40Hz to 1KHz sinusoidal signal and THD <= 1%, with resistive loads, measured with Amplifier Dyno AD-1 and the product at lower than 50°C case temperature and 13.8V supply voltage.**Frequency response measured at 2 times the minimum impedance, in 4 channels mode.The values as above are typical and may vary, due to electronic components tolerance or manufacturing process.For further informations or questions, visit our website or contact TARAMPS ELECTRONICS support. Technical featuresProtection System:Output Power @13.8VDC - 2 OHMS:Rated Power Consumption:Idle Consumption:Musical Consumption @13.8VDC:Signal- to-noise Ratio:2 Bridged Channels - 4 Ohms:Input Sensitivity (Level 100%):Number of Channels:Output Power @13.8VDC - 4 OHMS:Minimum Output Impedance:Equalization: NOR (FLAT) / POP/ ROC / JAZ / COU Frequency Response (Full Range):Minimum Supply Voltage:Maximum Supply Voltage:Weigth:Dimensions (W x H x L):2 Ohms04300W RMS (2 x 150W RMS)250mV 300W RMS (4 x 75W RMS)*180W RMS (4 x 45W RMS)>90dB45Hz ~ 20KHz (-3dB)***See TABLE (Pág. 17)0.60A14A16VDCOutput Short Circuit28A1.36lb